Wireless AC1750 Wave 2 Dual-Band PoE Access Point

DAP-2680

  • Product Status: Live
  • 802.11ac Wave 2 wireless, up to 1.75 Gbps1
  • MU-MIMO with beamforming
  • Band steering
  • Gigabit PoE-capable LAN port
  • AP Array utility support
  • Free D-Link Central WiFiManager
  • Limited Lifetime Warranty

Download the datasheet.

Where to buy
AC1750 Wave 2 Wi-Fi

802.11ac Wave 2 wireless with combined speeds of up to 1.75 Gbps1

Multiple Operational Modes

Functions as an access point, Wireless Distribution System (WDS), WDS with access point, or wireless client.

Band steering

Automatically steers traffic to the fastest, least congested band.

MU-MIMO & Beamforming

Allows multiple devices to connect simultaneously for improved efficiency. And creates highly-targeted Wi-Fi connections for superior Wi-Fi bandwidth.

Smart, secure & green

The wireless scheduler feature, which turns off wireless functionality when it isn’t needed, saves power and increases network security.

Faster Wi-Fi, Faster Business

The DAP-2680 Wireless AC1750 Wave 2 Dual-Band PoE Access Point features cutting-edge Wave 2 technology that brings greater speeds, efficiency, and security to your wireless customers. Perfect for small to medium business or enterprise environments.

This product is compatible with Nuclias Connect*

Nuclias Connect is our free remote network management software designed with network scalability, privacy and customisation in mind. It can be used either as an on-premises software management platform, or as a cloud solution.

*An upgrade to the latest product firmware is required.

Download

Nuclias hardware controller

The DNH-100 Wireless Controller provides an inexpensive, ready-made solution, and removes the need for installing and maintaining Nuclias Connect on additional hardware such as a server or PC. It supports up to 100 APs, automatically detects devices, pushes configurations, and provides robust hardware management. Simply plug in and power on.

Learn more

Be the best with Wave 2

Boost your business network to maximum wireless signal rates of up to 450 Mbps over the 2.4 GHz band, and 1300 Mbps over the 5 GHz band1.

 

Beamforming with MU-MIMO

Beamforming focuses the Wi-Fi signal to improve both range and connection strength so your clients can enjoy a superior Wi-Fi experience. Built-in Multiple-Input and Multiple-Output (MU-MIMO) technology gets high-bandwidth Wi-Fi signals to multiple devices simultaneously, for faster data distribution and efficiency.

The Perfect Fit for Your Network

Multiple operational modes allow you to select the DAP-2680 to operate as an access point, a Wireless Distribution System (WDS), a WDS with access point, or a wireless client.

Business Quality of Service

The Wi-Fi Multimedia (WMM) and Quality of Service (QoS) features make it an ideal access point for audio, video, and voice applications. When enabled, QoS allows the DAP-2680 to automatically prioritise network traffic. Customised priority rules can be adjusted through the web GUI. AP Load Balancing limits the maximum number of users per access point to ensure maximum performance.



Easy-mount setup

It can be ceiling mounted, wall mounted or placed on a desk. Integrated 802.3at Power over Ethernet (PoE) enables the device to be deployed easily and in more areas, where power outlets are not readily available.

 

Corporate-Class Security

Secure your business network with Personal and Enterprise versions WPA2 (802.11i), with support for RADIUS server backend or a built-in internal RADIUS server. MAC address filtering, wireless LAN segmentation, SSID broadcast disable, rogue AP detection, and wireless broadcast scheduling further protect your wireless network.

It supports up to eight VLANs per band, allowing multiple SSIDs to segment users. Includes a wireless client isolation mechanism, which limits direct client-to-client communication. Additionally, it supports Network Access Protection (NAP), a feature of Windows Server® 2008 and upwards, allowing network administrators to define multiple levels of network access based on an individual client’s needs.

We're here to help.

Over 35 years in the networking industry

Innovative end‑to‑end solution experts for small businesses to large corporations around the world.

Talking to us is easy

Skilled local support in 16 countries. Our support teams are ready to help you.

D-Link Limited Lifetime warranty

The quality and reliability of D-Link products enable us to provide an industry-leading Limited Lifetime Warranty with every registration.

Related Products

Nuclias Connect
DNC-100
Find out more
Nuclias Connect Hub
DNH-100
Find out more
Wireless AC1300 Wave 2 DualBand PoE Access Point
DAP-2610
Find out more
Wireless AC1200 Wave 2 Dual-Band PoE Access Point
DAP-2662
Find out more
Wireless AC2300 Wave 2 Dual-Band PoE Access Point
DAP-2682
Find out more
Type
Software Managed AP
Wireless standard
Wireless AC Wave 2
Frequency band mode
Dual-band simultaneous
Wireless speed
1300 Mbps 5 GHz
450 Mbps 2.4 GHz
Antenna type
Embedded omni-directional antennas
Antenna gain
3.6 dBi for 2.4 GHz
4.2 dBI for 5 GHz
Power-over-Ethernet
Yes
Wired interface
1 x Gigabit Ethernet LAN
Indoor/outdoor
Indoor
Type of housing
Plastic
Wireless modes
Access Point (AP)
WDS bridge
WDS with AP
Wireless client
Advanced features
802.11k/r Roaming
MU-MIMO
SmartBeam
Maximum number of SSIDs
16
Auto channel selection
Supported
WMM-PS/802.11e (U-APSD)
Supported
Wi-Fi scheduler
Supported
AP traffic load balance
Supported
L2 roaming
Supported
WEP 64/128 bit
Supported
WPA/WPA2-Personal/Enterprise
Supported
TKIP/AES encryption
Supported
WPA_WPA2_PSK over WDS
Supported
WLAN partition
Supported
SSID broadcast disable
Supported
Rogue AP detection
Supported
Station isolation
Supported
MAC address filtering
Supported
802.1X authentication
Supported
DHCP server
Supported
IGMP snooping
Supported
ARP spoofing
Supported
NTP
Supported
IPv6
Supported
Management platform
Nuclias Connect
WEB
Supported
SNMP (v1, v2c, v3)
Supported
CLI
Supported
Telnet
Supported
SSH
Supported
Syslog
Supported

1 Maximum wireless signal rate derived from IEEE standard 802.11 and 802.11ac specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors may adversely affect wireless signal range.
2 Please note that operating frequency ranges vary depending on the regulations of individual countries and jurisdictions. The DAP‑2680 may not support the 5.25 ‑ 5.35 GHz and 5.47 ‑ 5.725 GHz frequency ranges in certain regions.
3 For the EU region, this product is compliant with CE regulations and operates within the following frequency ranges: 2.4 ‑ 2.4835 GHz, 5.150 ‑ 5.250 GHz, 5.250 ‑ 5.350 GHz, and 5.470 ‑ 5.750 GHz.
4 For the EU region, this product is compliant with CE regulations and operates within the following frequency ranges: 2.4 ‑ 2.4835 GHz, 5.150 ‑ 5.250 GHz, 5.250 ‑ 5.350 GHz, and 5.470 ‑ 5.750 GHz.

Version Date Type File Size
Datasheet EN - PDF 0.72mb Download
Version Description Date Type File Size
Manual 2.00 RevA1 Product Manual 06-02-2020 - - Download
Manual 1.00 Revision A1 Product Manual 26-04-2018 - - Download
Version Description Date Type File Size
QIG 1.01 RevAx Quick Installation Guide 04-11-2020 - - Download
QSG 2.00 RevA1 Quick Setup Guide 06-01-2020 - - Download
QIG 2.00 RevA1 Quick Installation Guide 16-12-2019 - - Download
QSG 1.00 RevA1 Quick Setup Guide 03-12-2019 - - Download
QIG 1.00 RevAx Quick Installation Guide 02-10-2019 - - Download
QIG 1.01 Revision A1 Quick Installation Guide 15-01-2019 - - Download
QIG 1.00 Revision A1 Quick Installation Guide 13-03-2018 - - Download
This D-Link product includes software code developed by third parties, including software code subject to the GNU General Public License (“GPL”) or GNU Lesser General Public License (“LGPL”). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to you at:
 
http://tsd.dlink.com.tw/GPL.asp
 
The GPL code and LGPL code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL code and the LGPL code for this product and the terms of the GPL and LGPL.
Version Description Date Type
FW 2.00 RevA1 Nuclias Connect compatible firmware 26-09-2019 - Download
Firmware v2.00 Nuclias Connect compatible firmware 17-07-2019 - Download
FW 1.00 Revision A1 Firmware 03-05-2018 - Download
Version Description Date
Nuclias Connect Free remote centralised network management software 09-09-2019 Download
Central WiFiManager module for DAP-2680 Central WiFiManager module for DAP-2680 15-02-2019 Download
Version Description Date
CE doc UKCA 1.01 RevA1 CE document 01-08-2022 Download
CE doc UKCA 1.00 Revision A1 CE document 15-04-2021 Download
CE doc 4.00 RevA1 CE Document 08-07-2020 Download
CE doc 3.00 RevA1 CE Document 24-12-2019 Download
CE doc 2.00 RevA1 CE Document 23-07-2019 Download
CE doc 1.00 Revision A1 CE Document 03-05-2018 Download