How do I manually upgrade the firmware on my camera?

Note: All firmware upgrades should be done over a WIRED connection. If your camera is currently configured for wireless, plug it directly into your router before proceeding.

Step 1:  Download the latest firmware file for your device from https://eu.mydlink.com/support

Step 2: Open a web browser and enter the IP address of the camera in the address bar (default is 192.168.0.20). Press Enter.

Step 3: The default username is admin and the password field should be left blank. Click OK.

picture

Step 3: Click the Maintenance tab and then click Firmware Upgrade from the menu on the left-hand side.

picture

Step 4: Click on Browse to located the downloaded firmware and then click the Upload button. The firmware upgrade will commence. Once completed, the camera will reboot, and you will need to log in to the configuration interface again.

Rank: 1.5

These may also help:

  • How do I set up and install my DCS-942L? Read Answer
  • What do I do if I forget the login username & password of my camera? Read Answer
  • How do I set an administrator (admin) password on my DCS-942L? Read Answer